CLID Help

Unanswered Question
Apr 15th, 2008
User Badges:

When calling out BRI, I want individual numbers displayed as caller id. For incoming calls, I want to display the caller id on the phone. So I have a rule to translate the outgoing calling number, but the main office number 6321000 is displayed as the calling number. Incoming caller-id is shown as 'unknown'. 9 is PSTN access code. Extensions are 10xx.


voice translation-rule 9

rule 1 // /1/

!

voice translation-rule 10

rule 1 /^10/ /632&/

!

voice translation-rule 11

rule 1 /^9/ //

rule 2 /^111$/ /111/

!

!

voice translation-profile DID_TO_EXT

translate called 9

!

voice translation-profile OUT-GOING

translate calling 10

translate called 11

!


Please point out the errors I have made. Or give some reference.

Thanks in advance.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
paolo bevilacqua Tue, 04/15/2008 - 04:42
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

I think you should just send the DID digits:

rule 1 /^1/ //


Check with debug isdn q931 and if in doubt ask telco what you should send out.



Actions

This Discussion