cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
292
Views
0
Helpful
2
Replies

Issues in implementing Policy Based Routing

imranraheel
Level 1
Level 1

I am trying to implemet the following configurations

rtr 1

type echo protocol ipicmpecho 192.168.52.34

!

rtr schedule 1 life forever start-time now

!

track 192 rtr 1 reachability

!

int x

ip policy route-map ABC_MAP

!

route-map ABC_MAP

set ip next-hop verify-availability 192.168.52.34 10 track 192

!

ip route xx.xx.xx.241 255.255.255.255 192.168.52.34 track 192

ip route xx.xx.xx.241 255.255.255.255 xx.xx.xx.2 254

But when ever i try this i receive an error (command support issues)on verify-availability

I am using 3550 with (C3550-IPSERVICESK9-M), Version 12.2(35)SE IOS.

Kindly put some light on this

2 Replies 2

Jon Marshall
Hall of Fame
Hall of Fame

Imran

This command is showing up as unsupported in that version of IOS - see attached link

http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_35_se/configuration/guide/swuncli.html#wp1060487

Jon

is there any way out. Or do i have to update the IOS

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card