04-15-2008 02:21 PM - edited 07-03-2021 03:43 PM
I have a 4402 and need my guest users to be able to do vpn (ipsec or pptp) back to their companies. Can I do this?
04-16-2008 12:49 AM
Yes you can - depending on the version of software - the following links will give you detailed configuration examples to configure VPN passthru:-
WLC ver 4.0
http://www.cisco.com/en/US/docs/wireless/controller/4.0/configuration/guide/c40wlan.html#wp1084908
WLC ver 4.1
http://www.cisco.com/en/US/docs/wireless/controller/4.1/configuration/guide/c41wlan.html#wp1084908
WLC ver 4.2
http://www.cisco.com/en/US/docs/wireless/controller/4.2/configuration/guide/c42wlan.html#wp1084908
WLC ver 5.0
http://www.cisco.com/en/US/docs/wireless/controller/5.0/configuration/guide/c5wlan.html#wp1084908
HTH
04-16-2008 05:32 AM
But what would I enter under VPN gateway address. These are going to be vendors/guests using this so there is not just one VPN gateway address (If I read correctly that needs to be IP of device terminating the VPN connection).
04-16-2008 05:34 AM
You would enter "0.0.0.0" = any, just like in an static route.
HTH
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: