04-16-2008 04:33 AM - edited 03-15-2019 10:05 AM
I have asked my DB Administrator to help me run some reports from the CDR DB in SQL Manager. He tells me the DB is empty. I have verified CDR Enabled Flag in Service Paramenters. Does anyone have any ideas for me to get CDR going?
Will rate Posts.
04-16-2008 04:37 AM
You also need to verify that the CDR insert service is running on the publisher.
Attached is a troubleshooting guide for missing CDR records.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a008056bd4e.shtml#cause1
04-16-2008 04:40 AM
Thanks, Matt. Yeah, had this doc out already. Verified all of the recommendations in it. Still no good.
04-16-2008 04:42 AM
what version of ccm?
04-16-2008 04:47 AM
04-16-2008 05:22 AM
Hi!
I had the same issue yesterday and solved it with the helps of the docs guys provided. My reason was "Cause 2". If you have cluster CCM, make sure to do the following procedure on both publisher and subscriber:
2. Select the Cisco CallManager service for each server in the cluster.
3. Scroll down to CDR Enabled Flag under the System section. Set the value of this parameter to True.
4.Scroll down to Call Diagnostics Enabled under the Clusterwide Parameter (Device - General) section and assign a value of True to this parameter.
5. Click Update.
hope it helps,
cheers,
goran
04-16-2008 05:58 AM
Goran,
Thanks for the help. I did notice that my Sub did not have the CDR Enabled Flag set to true and this is teh box that does all call processing.
When should I start to see data in the tables? I recall reading somewhere it performs some process at 11:00 PM daily or something?
04-16-2008 06:06 AM
Hi!
I did that yesterday and today morning the problem was gone, I got PDF output. I read something about 5:00 AM default time for creating these CDRs (or sth...), so I suggest you just wait till tomorrow morning and see.
regards,
goran
04-16-2008 06:08 AM
Great. Thanks again. Lastly, did you run the reports through CAR Plugin or with SQL Query?
Thanks!
04-16-2008 06:11 AM
Hi Guys,
Nice work here! Just to add a little note (from Jorge)
Login into the CAR tool > go to the "system" menu > scheduler > CDR Load > Load CDR & CMR > by default, Time will be set at 00 Hr, 00 Min; Loading Interval = Every 24 hours; please change the "Duration" parameter to 120 min.
This will get you some records today if you want :)
Take care,
Rob
04-16-2008 06:13 AM
CAR plugin, I got the same error as you did... Still have some open questions about it which I just asked on forum.
best regards,
goran
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide