Easy VPN, 851W , No IP traffic

collinsd69 · ‎04-16-2008

I have a pair of 851W routers. I need to provide extended LAN functionality to the remote site, ie. same subnet. I have configured the link using Easy VPN. The tunnel is up, but I am unable to ping any devices on either side of the link. Very basic setup, Easy VPN server at one end with fixed public IP, Easy VPN remote at other end with dynamic IP.

Your help would be appreciated.

Many thanks,

Dave.

vkapoor5 · ‎04-23-2008

This document illustrates the configuration of IPSec between the PIX Easy VPN Remote hardware client feature and Easy VPN Server feature available in later releases of Cisco IOS? Software.

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00800ab518.shtml