VPN CON 3005 to Watchguard X550

TODD BERGMAN · ‎04-16-2008

I am getting an error in phase 2.

2368 04/16/2008 13:29:10.020 SEV=4 IKEDBG/97 RPT=1056 141.157.24.238

Group [141.157.24.238]

QM FSM error (P2 struct &0x365dac8, mess id 0x60374f02)!

2369 04/16/2008 13:29:10.020 SEV=7 IKEDBG/65 RPT=1101 141.157.24.238

Group [141.157.24.238]

IKE QM Initiator FSM error history (struct &0x365dac8)

<state>, <event>:

QM_DONE, EV_ERROR

QM_WAIT_MSG2, EV_TIMEOUT

QM_WAIT_MSG2, NullEvent

QM_SND_MSG1, EV_SND_MSG

Does anyone know what is going on?

-Thanks

vkapoor5 · ‎04-23-2008

This is a general message indicating something is wrong with quick mode. If the debug level is increased, there should be surrounding messages that will give a better indication of what's going on.