VPN connection established but cannot access anything on local LAN

Unanswered Question
Apr 16th, 2008

I've used SDM to configure EasyVPN on Dialer1 interface of my Cisco C1760. Cisco VPN Client Software can connect to the router, get ip address but I cannot ping or access any servers in the local lan (192.168.0.0/24). After the VPN connection is established, I test by trying to telnet to 192.168.0.1 (vlan1 interface) which is the router itself but it doesn't work.

Please help me figure this out. Please see the attachment on this post for running-config and everything else.

Thank you.

Attachment: 
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion