04-17-2008 06:48 AM - edited 03-15-2019 10:08 AM
I have installed the CiscoJTAPIClient.exe and I try to excecute makecall but an error occurs :
Address 201 is not in provider's domain.
But in callmanager, the phone 201 is registered and it can call other phones.
Have you a solution for me?
Sorry for my bad english
Solved! Go to Solution.
04-23-2008 08:31 AM
The error normally means that the RP is not properly cnfg's in CCM. The RP must be associated to the Jtapi User in the CCM (associated devices). When you configured the Trigger, was it available in the Pull Down?. verify that this device exists in the Cisco CallManager configuration and is associated with the JTAPI user on the CallManager
04-23-2008 08:31 AM
The error normally means that the RP is not properly cnfg's in CCM. The RP must be associated to the Jtapi User in the CCM (associated devices). When you configured the Trigger, was it available in the Pull Down?. verify that this device exists in the Cisco CallManager configuration and is associated with the JTAPI user on the CallManager
05-08-2008 12:23 AM
Thank you, it was that
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: