fcanalyzer remote

Unanswered Question
Apr 17th, 2008

Hi,

Have anyone used successfully the fcanalyzer remote command?. I have configured the mds and the ethereal rpcap interface as explained in the documentation but no joy.

Thanks,

Edmundo

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
ebodero Fri, 04/18/2008 - 00:55

Hi,

Thanks for the reply. I am using 1.3.6. When I try to configure Etheral it cannot connect to the MDS. There is connectivity between the PC and the MDS.

Regards,

Edmundo

inch Fri, 04/18/2008 - 14:22

Hi,

Do you have any IP Services line cards in your switch?

Cheers

Andrew

ebodero Sat, 04/19/2008 - 07:24

Thanks for your reply.

Yes. I have the IPS-8.

Regards,

Edmundo

inch Mon, 04/21/2008 - 02:41

G'day,

are you trying to remote fcanalyzer to a device which is on the same subnet as a port on your IPS or have a static route moving traffic through to your remote machine via a IPS port? (I suspect yes :)

I'm not sure of a work around but one of the Cisco guys might know a work around on here or you should log a TAC case :)

Cheers

Andrew

ebodero Wed, 04/23/2008 - 04:50

Hi Andrew,

Thanks for the ideas. Unfortunately I don't have the MDS under smarnet so I cannot open a TAC. Do you have it working?

inch Mon, 04/28/2008 - 16:32

G'day,

Unfortunately I could not get it working to a subnet which was being sent over a IPS port :(

The only way around for me was to have a workstation not on the same subnet as those on used by the IPS.

Cheers

Cheers

Andrew

ebodero Thu, 05/22/2008 - 04:52

Hi,

No. I gave up. I tried with different switches and son-os but no joy.

Edmundo

Actions

This Discussion

 

 

Trending Topics: Storage Networking