Solved: how can I find if we are receing BGP FUll or Partial routes?

m-abooali · ‎04-17-2008

Hi,

we are in the process of switching to a new provider and I need to know what we currently receiving using our current providers?

how can i see what full route or partial we are receiving from the router command prompt,

sh bgp neigh

sh bgp summary

don't show me that inof except for received routes?

Please advise.

Thx,

Mike

redcoruna · ‎04-17-2008

With the commands:

sh ip bgp

sh ip route

You can see it.

View solution in original post

Rick Morris · ‎04-17-2008

sh ip bgp neigh received

This will show you the routes received.

You can look in the sh ip bgp neigh and it will show you the number of routes received. Then you can compare it with this link to see if you are close to this or not:

http://bgp.potaroo.net/index-bgp.html

route-views.oregon-ix.net>sh ip bgp

BGP table version is 2257826, local router ID is 198.32.162.100

View solution in original post

redcoruna · ‎04-17-2008

With the commands:

sh ip bgp

sh ip route

You can see it.

m-abooali · ‎04-17-2008

Thanks very much. I was confused since ther was nothing to compare what I see on the roter.

Thx,

Mike

Rick Morris · ‎04-17-2008

sh ip bgp neigh received

This will show you the routes received.

You can look in the sh ip bgp neigh and it will show you the number of routes received. Then you can compare it with this link to see if you are close to this or not:

http://bgp.potaroo.net/index-bgp.html

route-views.oregon-ix.net>sh ip bgp

BGP table version is 2257826, local router ID is 198.32.162.100

m-abooali · ‎04-17-2008

Thanks very much.

Regards,

Mike