04-20-2008 07:13 PM - edited 03-11-2019 05:34 AM
I am trying to configure a pix firewall 506 E SW(6.3 (5))to run DHCP server for its inside hosts. Below is the config. For some reason, hosts say they are unable to contact the DHCP server to get leases. Any help on this is highly appreciated.
Inside interface ip is 192.168.1.1
dhcpd address 192.168.1.10-192.168.1.100
dhcpd dns 192.168.1.7
dhcpd lease 11520
dhcpd enable inside
dhcpd domian mydomain.com
04-20-2008 07:59 PM
Tell pix which interface the dhcp range will be used under.
e.i
dhcpd address 192.168.1.10-192.168.1.100 inside
04-20-2008 11:07 PM
Hi,
thanks for the quick reply. When I applied the command dhcpd enable inside, it automatically changed the command to dhcpd address 192.168.1.10-192.168.1.100 inside. Will run a packet capture and see if it helps.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: