04-20-2008 08:52 PM - edited 03-03-2019 09:38 PM
Dear All,
i would like to ask you that: how can i setup port security on Switch Cisco CE 500? ( i mean that per port per host)
Best Regards,
Rechard
Solved! Go to Solution.
04-23-2008 12:22 AM
dear richard,
the command is .......
go to the interface
switch-port port-security mac-address sticky (for automatically taking the mac-address of the connected device)
and if u want to do static entries.
switch-port port-security mac-addresss .........
04-20-2008 09:10 PM
Hi
As per the datasheet it supports port security...
regds
04-20-2008 10:24 PM
Dear Sir,
Thank you for your link.
i read document that you send to me but i still cannot find the option set port security.
as like Cisco switch 2950 it has command for do switchport port-security mac-address XXXXXXXx by the way i cannot find this option on the webbase. Could you tell me how can i do it ?
Best Regards,
Rechard
04-21-2008 05:20 PM
Dear all,
Everyone could you help me!!!!!!
I had problem on Switch CE-500. i would like to set mac-address on port ( i mean F0/1 connect to PC1 and when PC 2 or other PC want connect to F0/1 it doesn't work(port-security). but i don't see the option, the document tell that it can support smartport and port-security,So i not clear smart port and port-security How can CE-500 can do on port?
i Hope everyone can help me on this!!!
Best Regards,
Rechard
04-23-2008 12:22 AM
dear richard,
the command is .......
go to the interface
switch-port port-security mac-address sticky (for automatically taking the mac-address of the connected device)
and if u want to do static entries.
switch-port port-security mac-addresss .........
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide