Hi all, before all I'd like to thank the team of this forum for their assistance and helps and we really appreciate it.
So , i got stuck in something regarding CallManager 6.1, i got this configuration:
2xMCS 7825 for Cisco CallManager 6.1
One license file which include the seats for 1000 seats and the DLU.
So i know that when we are deploying CCM with redundancy we only need one Seats License (when dploying the CCM with 1:1 redundancy) which is going to be tied up to the Publisher's mac address, but since the service of the CallManager can only be activated by uploading the license file how we can configure the second server to act as the Subscriber and we only have one license which is going to be uploaded by the first one or the Publisher.
For the subscriber to have all services up and running the publisher has to have the correct amount of node licenses. With out that the subcriber wont start correctly.
You need to make sure you have the correct amount of node licenses installed on the publisher. If your just using the 50 user starter licenses that ships with CCM6.X this will not allow you to add a subscriber.
I would probably start with the install guide for the publisher install:
I would also have a look at the administrator guide and system guide so you can get a understanding of the new features and how to configure them: