cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
330
Views
0
Helpful
1
Replies

Problem with 2 x 515e Pix's running side by side

lord_studley
Level 1
Level 1

Hi

Our network has a firewall protecting a WAN link. The firewall runs in Transparent mode. A new firewall was added to act as a DMZ to the existing firewall. This firewall is running in routed mode. All connectivity is good but we have a problem with a server that will not backup. The connection it established through the first firewall and into the DMZ and all seems ok. After 2 hours the back up fails. There are no error messages and I have allowed any ip traffic in both directions.

Any ideas why this is happening?

Many thanks

1 Reply 1

gbudd12345
Level 1
Level 1

I could check the connection timeouts and xlate timeouts. I could kick those up to maybe 5-10 hours for the connection and around the same for the timeouts. See if that helps.

--Gavin Budd

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: