04-21-2008 10:40 AM - edited 03-15-2019 10:11 AM
Hi. Hi i have CCM6.1 and gateway 2821 with vic2/4fxo. On gateway i have configuration(
voice-port 0/3/0
connection plar opx 401
!
voice-port 0/3/1
connection plar opx 401
!
voice-port 0/3/2
connection plar opx 401
!
voice-port 0/3/3
connection plar opx 401
!
!
dial-peer voice 2000 voip
destination-pattern ...
session target ipv4:10.10.18.5
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
!
dial-peer voice 2001 voip
destination-pattern 401
session target ipv4:10.10.18.5
incoming called-number .
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
!
dial-peer voice 101 pots
preference 1
destination-pattern 9T
port 0/3/0
!
dial-peer voice 102 pots
preference 2
destination-pattern 9T
port 0/3/1
!
dial-peer voice 103 pots
preference 3
destination-pattern 9T
port 0/3/2
!
dial-peer voice 104 pots
preference 4
destination-pattern 9T
port 0/3/3
!
)
When i call whith pbx on port 0/3/x the phone with DN 401 don't Ring. You can help me fix it?
10.10.18.5 - ip CCM.
04-21-2008 11:12 AM
Is the router configured as h.323 gw in the CM?
You can also configure a trunk group for the fxo ports. This will let you use a single outgoing DP.
04-21-2008 11:19 AM
Yes. Router configured as h323 gw in ccm.
Outgoing call work.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: