04-21-2008 10:44 AM - edited 03-03-2019 09:38 PM
Hello,
After inserting the card in the Router slot, I don't see the additional controller T1 available, show version tells additional 2 channelized T1's.
How can I configure serial interfaces now ? pelase help.
Thanks
Solved! Go to Solution.
04-21-2008 11:30 AM
Configure "card type t1
Controllers will appear, for a full T1 configure "channel-group 0 timeslots 1-24".
Serial interface will appear, configure it as usual.
Hope this helps, please rate post if it does!
04-21-2008 11:14 AM
Which card exactly ? Do show diag to know.
04-21-2008 11:19 AM
Its VWIC2-2MFT1-T1/E1 2 ports
Thanks
04-21-2008 11:30 AM
Configure "card type t1
Controllers will appear, for a full T1 configure "channel-group 0 timeslots 1-24".
Serial interface will appear, configure it as usual.
Hope this helps, please rate post if it does!
04-21-2008 12:43 PM
Thanks much.
04-21-2008 04:03 PM
No worries, it happens a lot with the vwic2.
Thanks for the nice rating and good luck!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: