04-21-2008 10:44 AM - edited 03-03-2019 09:38 PM
Hello,
After inserting the card in the Router slot, I don't see the additional controller T1 available, show version tells additional 2 channelized T1's.
How can I configure serial interfaces now ? pelase help.
Thanks
Solved! Go to Solution.
04-21-2008 11:30 AM
Configure "card type t1 " first.
Controllers will appear, for a full T1 configure "channel-group 0 timeslots 1-24".
Serial interface will appear, configure it as usual.
Hope this helps, please rate post if it does!
View solution in original post
04-21-2008 11:14 AM
Which card exactly ? Do show diag to know.
04-21-2008 11:19 AM
Its VWIC2-2MFT1-T1/E1 2 ports
04-21-2008 12:43 PM
Thanks much.
04-21-2008 04:03 PM
No worries, it happens a lot with the vwic2.
Thanks for the nice rating and good luck!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community
