But every thing same ok for me the ospf neigjbor is full and find the it serial point to point.
check the output....
Serial0/1/0 10.244.23.1 YES NVRAM
up up
Neighbor ID Pri State Dead Time Address Interface
10.244.23.5 0 FULL/ - 00:00:36 10.244.23.5 Serial0/1/0
But there is many CRC and I change the serial and I dont know why ...
5 minute input rate 0 bits/sec, 1 packets/sec
5 minute output rate 0 bits/sec, 1 packets/sec
10226 packets input, 752332 bytes, 0 no buffer
Received 0 broadcasts, 17606 runts, 0 giants, 0 throttles
18349 input errors, 742 CRC, 0 frame, 0 overrun, 0 ignored, 1 abort
10918 packets output, 816510 bytes, 0 underruns
router ospf 23
log-adjacency-changes
network 10.244.23.1 0.0.0.0 area 1
interface Serial0/1/0
ip address 10.244.23.1 255.255.255.192
encapsulation ppp
ip ospf network point-to-point
keepalive 10 3
end
