POE for Aironet 1131 on Catalyst Express 500

Unanswered Question
Apr 22nd, 2008
User Badges:

Hi all,


we are using 3 AP Aironet 1131 (Version 12.4(10b)JA3) in a WDS. All are connected to a Switch Catalyst Express 500 to receive their Power. The Problem is they work for some time and the the AP reloads without further errormessage.

Speed and Duplex mode are fixed on Switch and AP-Side. Does anybody now this problem or can give me a hint?


Thanks in Advance


Alex

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
drolemc Mon, 04/28/2008 - 10:41
User Badges:
  • Silver, 250 points or more

This can happen if power settings are configured incorrectly on the AP. Ensure that the correct parameters are configured. Here is a link which explains how to configure power on APs.


http://www.cisco.com/en/US/docs/wireless/access_point/12.3_2_JA/configuration/guide/s32frst.html#wp1103896


Also, try disabling CDP and check if you are seeing the issue again.


smallore_4plus Mon, 04/28/2008 - 11:55
User Badges:

Hi,


thanks for the hints, but i found the issue: The problem was a damaged network cable. After exchanging the cable, all is working properly.

Actions

This Discussion