Port Secure on hwic-4ESW for 1800 ISR

Unanswered Question
Apr 22nd, 2008
User Badges:

Has anyone configured Port Secure for the 4esw cards on 1800 routers.


Looking to try and lock down Wireless AP's to an interface to prevent unauthorised access in a 3rd party location.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
didyap Mon, 04/28/2008 - 12:19
User Badges:
  • Silver, 250 points or more

The HWIC-4ESW ports can be configured as Layer 2 ports ( switchports ) either access ports or trunks. Then you would need to configure vlan interfaces to place any routing and IP ACL configurations. This module does not allow to configure its ports as pure routed interfaces. Further details are available at:


http://www.cisco.com/en/US/docs/ios/12_3t/12_3t8/feature/guide/esw_cfg.html#wp1051576


Actions

This Discussion