04-23-2008 05:05 AM - edited 03-11-2019 05:35 AM
I having trouble configuring my first ASA I need to pass lpd traffic and the implicit rule is blocking me I attached my config. I am not sure if the problem is the access list or my nat.
04-26-2008 03:48 PM
do the following :
access-list outside_access_in extended permit tcp any host 192.168.9.9 eq lpd
static (inside,outside) 192.168.9.9 10.1.24.9 netmask 255.255.255.255
Your static is the other way round.
Raman
04-28-2008 06:13 AM
Thank you for the information. I discovered the problem on Friday and was able to correct it. I question it does help to step away from a projectfor a while then come back with a fresh look at the code.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: