Antenna Types for 1400 Series Wireless Bridges

Unanswered Question
Apr 23rd, 2008
User Badges:

Deploying 1400 Bridges in a line of site type of configuration. The distance is right at 200 meters between building, am looking for any suggestions in regards to what type of antennas to deploy to get best bandwidth and narrowest beam, since this is in an industrial area.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
bcolvin Wed, 04/23/2008 - 11:28
User Badges:
  • Bronze, 100 points or more


David if your 1400's have the built in antenna the desision has been made for you, if you have the 1400 with the antenna connection in the face of the unit you will get to choose your antenna.

For your aplcation I would use the AIR-ANT58G10SSA-N Sector antenna this should give you a excellent link.

Cisco Antenna link



Sushil Kumar Katre Wed, 04/23/2008 - 21:49
User Badges:
  • Gold, 750 points or more


If you want narrowest beamwidth then I would go with AIR-ANT58G28SDA-N antena 4.75°H,4.75°V. However comparing the cost of this antenna the one which Bill suggested I would like to go with what Bill's suggestion.

Beamwidth for AIR-ANT58G10SSA-N is 60° H, 60° V.

-> Sushil

zeisingd Thu, 04/24/2008 - 07:31
User Badges:

Thank you all for your responses... I too, was leaning towards those as well, nice to hear it from others as well...



This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode