×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

out of band management connection with isdn

Unanswered Question
Apr 24th, 2008
User Badges:

Hi all, if I want to connect to my routers with an isdn line for out of band management, what do I need to do? would it be a direct connection to the router, and how can you initialize this from my pc using hyperterm or dial up connection


please help

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
spremkumar Fri, 04/25/2008 - 02:56
User Badges:
  • Red, 2250 points or more

Hi


You need to use a isdn line from your pc to dial in onto the isdn line connected in the router.


you need to do the config in such a way that it accepts your dial out from the pc with CHAP.


the config in the router will be same/similar to the config you do to accept dial outs from any other router if you are connecting the isdn line onto the bri port.


regds


carl_townshend Fri, 04/25/2008 - 03:29
User Badges:

what would I use on my pc to connect to this?


what would the config on the router look like? would I need to use ip addresses and routes ?

Actions

This Discussion