cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
744
Views
0
Helpful
1
Replies

Active / Active, active / stadnby asa 5510

jorg.ramakers
Level 1
Level 1

Hi,

We are trying to build a security zone with 4 firewalls and a physical dmz.

fw 1 and fw 2 are on the left side, then a 2 switches and 2 microsoft firewalls on the right side. All are supposed to connected redundant to each other. fw 1 and fw2 are asa 5510. both 5510 firewalls are supposed to be active / active. One question i have is, the firewalls on the right side to what ip do they need to connect for the default route? Does the asa 5510 has some kind of vrrp for the inside interface?

Best regards

Jorg

1 Reply 1

hadbou
Level 5
Level 5

refer the PIX/ASA : Active/Active Failover Configuration guide in the following link for better understanding of the configuration:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080834058.shtml#tab2

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: