04-24-2008 03:04 PM - edited 07-03-2021 03:46 PM
Is there anyway to change this limit?
I have a great and easy to use system in place except that some of our contractors go beyond 30 days.
This arbitrary limit is potentially going to screw the pooch on how useful this system perceived to be.
Thanks.
04-25-2008 03:13 AM
Hi Daniel
I'm running version 5.0
Make sure that the defaults editable box is checked in the lobby ambassador account - then the time limits can be altered by the lobby ambassador when editing the guest accounts (under the advanced tab).
hope this helps
Scott
04-25-2008 11:59 AM
Sounds awesome!
I just can't seem to find the screen you're talking about.
I'm running 5.0 and I think I've been through every page on the system and can't seem to find it.
I'll keep looking.
04-25-2008 01:48 PM
I think figured it out. Are you talking about 5.0 WCS? I'm not running WCS.
I'm running the WLCs (5.0) without WCS (yet).
I guess I'll open up a TAC case to see if this is a point of configuration on the WLC.
Thanks,
Daniel
04-28-2008 12:19 AM
Hi Daniel,
Yes - I was talking about WCS.
Regards,
Scott
06-05-2008 09:14 AM
Hi dadeyoung,
No,you cannot change this limit on wlc.IT is not implemented on wlc.If you use wcs,you will be able to create users beyond 30 days.wlc has max limit of 30 days.
06-12-2008 01:46 AM
You can set a value of 0 on the lifetime of the new user. This then removes the user from the Lobby Ambassador list, and creates a permanent user account. The user is listed under the main Admin account in - Security > Local Net Users, and can be deleted when no longer required.
I am running Software version 4.2.99.0.
Hope this helps.
Marc
08-04-2008 02:55 AM
Hi,
I have the same issue. A customer uses the lobby ambassador account to create guest accounts. When they create a guest with lifetime 0, this user dissapears from their list of guest users. The customer wants to see this user also, and want to delete it if neccessary.
A way around is then to set the lifetime as much as possible, but 30 days max is not long enough. Is there another way to solve this issue?
06-16-2008 06:00 AM
Hi dadeyoung,
you can able to create a guest account for more than 30 days by using "*.csv" file, but when I tested this scenario, after 30 days, the user is not getting renewied.still it shows older value only
This issue already raised.
Regards
Sridharank
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: