04-24-2008 03:56 PM - edited 03-05-2019 10:36 PM
I have an SNMP community string that is incorrect on a Cisco 2811 router. I can't seem to change the snmp-community name. What are the commands to change the name?
04-24-2008 07:55 PM
Hi James,
The commands to change the SNMP community string is as follows.
Router(config)#no snmp-server community xxxx
where xxxx is current community string
Router(config)#snmp-server community yyyy
where yyyy is the new community string.
Pls follow the below mentioned link. It will give you a better understanding.
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094aa4.shtml#modifysnmp
*Pls Rate if it Helps*
Rgs,
Jack
04-25-2008 02:25 AM
Jack,
Thanks. I was able to change the string and enter the new community name. I didn't realize it was so easy...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: