cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
546
Views
0
Helpful
2
Replies

SNMP Community

jlcarey1usa
Level 1
Level 1

I have an SNMP community string that is incorrect on a Cisco 2811 router. I can't seem to change the snmp-community name. What are the commands to change the name?

2 Replies 2

jackthumar
Level 1
Level 1

Hi James,

The commands to change the SNMP community string is as follows.

Router(config)#no snmp-server community xxxx

where xxxx is current community string

Router(config)#snmp-server community yyyy

where yyyy is the new community string.

Pls follow the below mentioned link. It will give you a better understanding.

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094aa4.shtml#modifysnmp

*Pls Rate if it Helps*

Rgs,

Jack

Jack,

Thanks. I was able to change the string and enter the new community name. I didn't realize it was so easy...

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco