cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
676
Views
0
Helpful
1
Replies

PIX config tftp error

yjdabear
VIP Alumni
VIP Alumni

Got this when doing "write net xx.xx.xx.xx:pixname-pix". The PIX is running 7.2(2). Is this CSCsg87808? If so, it sounds rather drastic to have to remove all??? the "snmp-server" commands or downgrade.

%Error reading system:/running-config (Configuration line too long)

[FAILED]

1 Accepted Solution

Accepted Solutions

Joe Clarke
Cisco Employee
Cisco Employee

Yes, this appears to be the bug (assuming you have snmp-server commands). You should also get the same error doing a "write mem". An upgrade to 7.2(3) or 7.2(4) will fix it.

View solution in original post

1 Reply 1

Joe Clarke
Cisco Employee
Cisco Employee

Yes, this appears to be the bug (assuming you have snmp-server commands). You should also get the same error doing a "write mem". An upgrade to 7.2(3) or 7.2(4) will fix it.