cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3760
Views
0
Helpful
5
Replies

lwapp ap controller ip address <IP-address>

j.delossantos
Level 1
Level 1

On this command which IP address do I use? ap-manager? or management?

2 Accepted Solutions

Accepted Solutions

ericgarnel
Level 7
Level 7

It looks like you are staging an AP. I would use the management address. Someone please correct me if I am wrong this, I haven't had to do this since 3.x

View solution in original post

Hi,

It should be the "WLC management IP address".

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008072d9a1.shtml

Search for "If necessary, issue the lwapp ap controller ip address A.B.C.D" in the above link.

Hope this helps.

-> Sushil

View solution in original post

5 Replies 5

ericgarnel
Level 7
Level 7

It looks like you are staging an AP. I would use the management address. Someone please correct me if I am wrong this, I haven't had to do this since 3.x

Hi,

It should be the "WLC management IP address".

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008072d9a1.shtml

Search for "If necessary, issue the lwapp ap controller ip address A.B.C.D" in the above link.

Hope this helps.

-> Sushil

Thank you both for the help! :)

No problem man.

-> Sushil

tejasjain7
Level 1
Level 1

For more details check this out:

 

http://tejasjain1991.blogspot.in/2014_04_01_archive.html

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: