04-25-2008 09:54 AM - edited 03-11-2019 05:37 AM
Hi, I know that Cisco ASA has limited QOS but is there any other way so that I restrict bandwidth usage on users and allocate bandwidth as per user requirements. I have 1mbps lease line link and when users download anything through internet then network gets slow and all users suffers so I want to allocate only 20 kb to each user, means each user will able to use upto 20 kb not higher than 20 kb. Thnaks
04-25-2008 10:05 AM
You can use MQC to rate-limit (Policing) the traffic and apply the service-Policy on the outside inetrface. Release 7.x and later provides this feature of rate limiting.
04-25-2008 10:09 AM
Hi Thanks. Is there any example of MQC configuration so that it would be easy for me to configure. Thanks
04-25-2008 10:14 AM
05-12-2008 05:36 AM
I recently use this conf to limit bandwidth used by internal users conecting to an external terminal server.
access-list acl_QoS extended permit tcp any any eq 3389
class-map class_QoS
match access-list acl_QoS
policy-map outside_policy
class class_ QoS
police output 56000 1500
service-policy outside_policy interface outside
I can see that ASA restrict no tonly outgoing but returning traffic matched by this ACL.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: