Load balancing for remote sites with dynamic IPs

Unanswered Question
Apr 25th, 2008

My site router is connected to 2 remote routers thru Internet. Any ideas how can I set load balancing up if remote sites get their ip addresses from ISP's DHCP server?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
joseph.yuffa Sat, 04/26/2008 - 08:52

Hi,

The example is not relevant to my case. Please see attached diagram for my topology. I need load sharing between destination routers B and C when accessing it from A

Attachment: 
Paolo Bevilacqua Sat, 04/26/2008 - 09:44

Sorry, can't see proprietary file format.

The remote router will have to begin the vpn via a dmvpn type setup.

You can also no not envrypt and just use poin-to-multipoint GRE with nhpr. This is also a DMVPN tecnique.

Then when you have routing information for the site over GRE tunnels, router will load share using the two lthat you will have set to be terminated at B and C. With dynamic routing, you will have redundancy as well.

Actions

This Discussion