Monitoring BGP using SNMP

Unanswered Question
Apr 25th, 2008

Hi Friends,

We have BGP enabled on our networks with SNMP enabled to trigger alerts in case of link up/ downs. What we observe is when BGP session goes Active (but interface is up), we do not get any alert from SNMP saying BGP status has changed. The SNMP configuration is as below. Would appreciate if you can let me know if there is anything missing or something required to the config to monitor BGP state changes. Thanks in advance.

snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart

snmp-server enable traps isdn call-information

snmp-server enable traps bgp

snmp-server enable traps config

snmp-server enable traps frame-relay multilink bundle-mismatch

snmp-server enable traps frame-relay

snmp-server enable traps frame-relay subif

snmp-server enable traps hsrp

snmp-server enable traps syslog

Best Regards,

Manoj

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion