04-26-2008 03:29 AM - edited 03-03-2019 09:42 PM
Hi people, im new here. I have got a Cisco 877 with Advance Sec ISO. I have configured it for internet access and I am able to connect and surf the internet on all PCs on my inside network. The next thing I need to be able to do is run a webserver and ftp server inside with access from the WAN. So my question is. How do I setup a port forward for web port 80 and ftp port 21 to my internal server 192.168.1.3. Any help would be fantastic.
Cheers
Will
04-26-2008 03:35 AM
Hi
Hope the below link will help u.
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094e77.shtml#topic7
Thanks
Mahmood
04-26-2008 04:03 AM
04-26-2008 04:16 AM
Hi
can u try adding extendable keyword in ur translation entires.
Thanks
Mahmood
04-26-2008 04:24 AM
Adding the following line.
ip nat inside source static tcp 192.168.1.3 21 interface Dialer1 21 extendable
Comes back Invalid input detected.
04-26-2008 04:41 AM
Hi
it should be like this,try n check.
ip nat inside source static
Thanks
Mahmood
04-26-2008 04:50 AM
Sorry, I might be being silly, but still no joy. It just gets Invalid input detected and pointing to the word extendable.
04-26-2008 06:07 AM
All sorted and working now.
Thanks for all your help.
04-26-2008 06:37 AM
Hi
Just for information,what was the missing part.
Thanks
Mahmood
04-26-2008 06:42 AM
Hi,
It was nothing missing, it was my friend who was testing for me from external typing in the wrong IP address for the FPT. So user error. NAT is working like a dream. Next fun thing is the VPN, but will be leaving that for another fun day.
Thanks again for the pointers, very helpful.
Will
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide