An implementation on cucm6.1

Unanswered Question
Apr 26th, 2008

cucm6.1 how to implement like this:

1) Remote end(an old fashion intercom), dials in, 3 phones should auto answer the call, the intercom is able to speak to these phones.

2) After the intercom claims which phone he needs to talk to, that phone should continue the conversation, however, all other phones should quit immediately.

I believe paging on Ipsession can do For step 1), however, no idea for sequential setup. Any information is appreciated.



I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
ivillegas Mon, 05/05/2008 - 09:02

The Intercom feature is only from one ip phone to another. The Intercom feature allows a user to place a call to a predefined target (phone). The called destination auto-answers the call in speakerphone mode with mute activated. This sets up a one-way voice path between the initiator and the destination, so the initiator can deliver a short message, regardless of whether the called party is busy or idle.


This Discussion