ip nat over two pvc with cisco 876w

Unanswered Question
Apr 27th, 2008

Hello,

I will connect my provider over 2 pvi.

I create two dialer. Each dialer gets a dynamic ip from my provider.

I would like to route all packages from 172.16.1.0 to dialer 1 and all packages from 172.16.2.0 to dialer 2.


I have create the following setup see attachment. I can route from 172.16.1.0 to dialer 1 but not form the second network two the second dialer. Can someone give me assistance?


with best regards

André



Attachment: 
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Edison Ortiz Sun, 04/27/2008 - 07:16

Remove the highlighted portion of the config:


route-map NAT-VoipDailer permit 10

description NAT route-map for dialer 2

match ip address ACL-NAT-VoipNet

match interface Dialer2


route-map NAT-DataDailer permit 10

description NAT route-map for dailer 1

match ip address ACL-NAT-DataNet

match interface Dialer1


and modify the following entry:


ip access-list extended PBR-Traffic-Divert

permit tcp 172.16.2.0 0.0.0.255 any


with:


ip access-list extended PBR-Traffic-Divert

permit ip 172.16.2.0 0.0.0.255 any


HTH,


__


Edison.

Actions

This Discussion