04-27-2008 05:09 AM - edited 03-18-2019 08:51 PM
I have two call managers connected via an intercluster trunk (H.323) UNity 5.x server is at site 1 which has CUCM 5.0. WHen I call from an external phone to a user at site 2 (CUCM 4.3) and the call forwards to voicemail I cannot hear the Unity. I can leave a message in the user's mailbox - so audio to UNity works but not the other way around. If I call a user at site 2 over the trunk it works both ways.
Where should i be looking for this problem?
Thanks,
Bill
Solved! Go to Solution.
04-27-2008 09:10 AM
routing issues that prevent the RTP from unity to reach the GW would be the first thing i check
also check there are no codec issues
HTH
javalenc
if this helps, please rate
04-27-2008 09:10 AM
routing issues that prevent the RTP from unity to reach the GW would be the first thing i check
also check there are no codec issues
HTH
javalenc
if this helps, please rate
04-30-2008 05:26 AM
That was it. The far end was not advertising the route.
Thanks,
Bill
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide