CCM5 integration with MGCP 3845 GW

Unanswered Question
Apr 27th, 2008

We have a problem in regestering our CCM 5.0 and the 3845 voice GW router, the CCM shows the router as unregestered with the IP Address, and the router I noticed that I'm not able to show the MGCP endpoints. please how can I verify or point to the problem.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jaime Valencia Sun, 04/27/2008 - 09:06

verify your config, maybe you're missing the service mgcp under the pri-group.

maybe the dial-peers do not have the application mgcpapp commmand.

maybe you selected the wrong slot.

if possible post your config

HTH

javalenc

if this helps, please rate

mjabareen Sun, 04/27/2008 - 23:29

thanks, we are using BRI interfaces, below is the router configuration:

voice service voip

allow-connections h323 to h323

allow-connections h323 to sip

supplementary-service h450.12

h323

!

!

!

voice class codec 1

codec preference 1 g729r8

!

!

!

!

!

!

!

!

ccm-manager mgcp

ccm-manager music-on-hold

ccm-manager config server 10.65.60.4

ccm-manager config

!

!

username admin password 0 ad-tech123

!

!

!

!

interface GigabitEthernet0/0

ip address 10.65.60.5 255.255.255.0

duplex auto

speed auto

media-type rj45

!

interface Service-Engine0/0

ip unnumbered GigabitEthernet0/0

service-module ip address 10.65.60.6 255.255.255.0

service-module ip default-gateway 10.65.60.1

!

interface GigabitEthernet0/1

no ip address

shutdown

duplex auto

speed auto

media-type rj45

!

interface Serial0/0/0

no ip address

shutdown

clockrate 2000000

!

interface Serial0/0/1

no ip address

shutdown

!

interface BRI0/1/0

no ip address

isdn switch-type basic-net3

isdn point-to-point-setup

isdn incoming-voice voice

!

interface BRI0/1/1

no ip address

isdn switch-type basic-net3

isdn point-to-point-setup

isdn incoming-voice voice

!

ip classless

ip route 0.0.0.0 0.0.0.0 10.65.60.1

ip route 10.65.60.6 255.255.255.255 Service-Engine0/0

!

!

ip http server

no ip http secure-server

!

!

!

!

control-plane

!

!

voice-port 0/1/0

compand-type a-law

cptone JO

timeouts interdigit 3

connection plar 199

!

voice-port 0/1/1

compand-type a-law

cptone JO

timeouts interdigit 3

connection plar 199

!

mgcp

mgcp call-agent GetCCM 2427 service-type mgcp version 0.1

mgcp rtp unreachable timeout 1000 action notify

mgcp package-capability rtp-package

no mgcp package-capability res-package

mgcp package-capability sst-package

no mgcp package-capability fxr-package

mgcp package-capability pre-package

no mgcp timer receive-rtcp

mgcp sdp simple

mgcp fax t38 inhibit

mgcp rtp payload-type g726r16 static

!

mgcp profile default

!

!

!

dial-peer voice 3 voip

destination-pattern [1-4]..

session protocol sipv2

session target ipv4:10.65.60.6

dtmf-relay sip-notify

codec g711ulaw

no vad

!

dial-peer voice 1 pots

application mgcpapp

port 0/1/0

!

dial-peer voice 2 pots

application mgcpapp

port 0/1/1

!

dial-peer voice 100 pots

preference 1

destination-pattern 9T

port 0/1/0

!

dial-peer voice 101 pots

preference 2

destination-pattern 9T

port 0/1/1

!

end.

mjabareen Sun, 04/27/2008 - 23:29

and here below some result for debug mgcp:

*Apr 28 07:28:34.903: mgcpapp_process_mgcp_msg : socket drained.

*Apr 28 07:28:34.903: MGCP sys msg: (15)

*Apr 28 07:28:34.903: xlate sys msg: (15, 65532148)

*Apr 28 07:28:34.903: sys msg values: (INVALID MGCP EVENT, 65280, , 1619485180, CALL_IDLE)

*Apr 28 07:28:34.903: process mgcp_handle_cmapp_event

*Apr 28 07:28:34.903: mgcp_cmapp_send_keepalive send NTFY KeepAlive

*Apr 28 07:28:34.903: xgcp_endpt_get_by_ifn

*Apr 28 07:28:34.903: xgcp_endpt_get_tree_link_by_ifn

*Apr 28 07:28:34.903: xgcp_endpt_compute_key- type -1 slot -1 subunit 58

*Apr 28 07:28:34.903: xgcp_endpt_get_tree_link_by_ifn : computed key 0x0xF0000000

*Apr 28 07:28:34.903: send_mgcp_empty_notify_msg: endpt *, complete_endpt [email protected]

*Apr 28 07:28:34.903: -- mgcp_build_packet()-

*Apr 28 07:28:34.903: - mgcp_estimate_msg_buf_length() - 328 bytes needed for header

- mgcp_estimate_msg_buf_length() - 373 bytes needed after checking parameter lines

- mgcp_estimate_msg_buf_length() - 373 bytes needed after cheking SDP lines

*Apr 28 07:28:34.903: --- mgcp_build_parameter_lines() ---

- mgcp_val_mandatory_parms()

- mgcp_build_request_id()

- SUCCESS: Request ID string building is OK

- mgcp_build_obs_events()

- mgcp_build_obs_events()- mp_head_obs_evt_list NOT NULL

- mgcp_build_obs_events()- out of for loop for next node in list

- SUCCESS: Building MGCP Parameter lines is OK

*Apr 28 07:28:34.903: - SUCCESS: MGCP message building OK

*Apr 28 07:28:34.903: - SUCCESS: END of building

*Apr 28 07:28:34.903: * mgcp_get_ca_addr_port:

*Apr 28 07:28:34.903: * mgcp_get_ca_addr_port: Used endpoint NE 10.65.60.4:2427

*Apr 28 07:28:34.903: * mgcp_get_ca_addr_port: NE addr 10.65.60.4:2427

*Apr 28 07:28:34.903: * mgcp_enq_retx_msg: trans_id 59,ntfy_ent 10.65.60.4:2427

*Apr 28 07:28:34.903: * mgcp_root_get_profile:

*Apr 28 07:28:34.903: mgcp_add_trans_id_rec: Add trans id (59, 648ECC30) record

*Apr 28 07:28:34.903: mgcp_stw_timer_start timer type 0, duration 500

*Apr 28 07:28:34.903: MGCP Packet sent to 10.65.60.4:2427--->

NTFY 59 [email protected] MGCP 0.1

X: 0

O:

<---

*Apr 28 07:28:34.903: send_mgcp_empty_notify_msg NTFY Packet sent successfully - *

*Apr 28 07:28:34.903: MGC stat - 10.65.60.4, total=67, succ=42, failed=24

*Apr 28 07:28:34.903: MGCP Packet received from 10.65.60.4:2427--->

200 59

<---

*Apr 28 07:28:34.903: mgcpapp_process_mgcp_msg : processing received message.

*Apr 28 07:28:34.903: -- mgcp_parse_packet() - call mgcp_parse_header

*Apr 28 07:28:34.903: mgcp_parse_response : 200 59

*Apr 28 07:28:34.903: mgcp_string_parse: return code=1.- mgcp_parse_packet() - out mgcp_parse_header

- SUCCESS: mgcp_parse_packet()- MGCP Header parsing was OK

- SUCCESS: mgcp_parse_packet()- END of Parsing

*Apr 28 07:28:34.903: * mgcp_msg_ack

*Apr 28 07:28:34.903: MGC stat - 10.65.60.4, total=67, succ=43, failed=24

*Apr 28 07:28:34.903: * mgcp_msg_ack: Removing msg : NTFY 59 [email protected] MGCP 0.1

X: 0

O:

*Apr 28 07:28:34.903: * mgcp_msg_ack: Setting the restart method to NONE

*Apr 28 07:28:34.903: mgcpapp_process_socket

*Apr 28 07:28:34.903: mgcpapp_process_mgcp_msg : socket drained.

Actions

This Discussion