Point Of Sale communcation over Cisco 3640 router with PRI

m.salah · ‎04-28-2008

Dears,

I have a Point Of Sale Terminal at the remote side, this POS dialing a PRI and connected to one of the PRI channels at the router, after that this POS needs to send a message to the payment server over specific TCP port for payment authorization, what kind of configuration can be done here please? Appreciate if some one sends me a sample of configuration.

paolo bevilacqua · ‎04-29-2008

Do you have the modem configuration for the 3640 working already ?

m.salah · ‎04-29-2008

yes, the modem is MICA type which support analog lines.

paolo bevilacqua · ‎04-30-2008

Then all you need to do, is to configure "autocommand" under the vty line that does telnet to the server.

m.salah · ‎05-04-2008

Hi,

But how the message will be sent to the server, do you have sample of configuration?

Thanks.

paolo bevilacqua · ‎05-04-2008

The messages are inside the telnet connection. There is no configuration to speack of, just the autocommand telnet.

ricardo-morales · ‎11-29-2008

hi do you resolved this issue, i am triying to do the same with a AS5350, can you paste de config to try to solve this.,