VG224 configuration with CCME3.3

Unanswered Question
Apr 28th, 2008
User Badges:

Hi,

I am trying to configure a VG224 with a CCME3.3 router.I need call transfer facility from analog phones that r connected to this VG224.I am configuring VG224 as a SCCP gateway.

i have tried to configure sccp in VG224.what i have done in VG224 is ;

#conf t

#sccp local <interface>

#sccp ccm <ipaddress of ccme> identifier 1 version 3.3

#sccp

#sccp ccm group<groupnumber>

#associate ccm 1 priority 1

#exit

When i have typed the "#show sccp" command;

this message shows....

"sccp parameters are not activated (dspfarm profiles)or not associated with ccm group"

I have dsp module in CCME router..

Can anyone please help me with the detailed configuration??

I am stuck with this..

please please please help me with this....

Thanks in advance.............


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jaime Valencia Mon, 04/28/2008 - 15:39
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

i do not see the following:


stcapp ccm-group 1

stcapp


dial-peer voice 1 pots

service stcapp

port 2/1


HTH


javalenc


if this helps, please rate

hanson.stanley Tue, 04/29/2008 - 00:19
User Badges:

Hi,

Thanks for the quick reply..i have to try this in customer place and after that ill let you know the results..thank you very much for the reply.....

Actions

This Discussion