04-28-2008 06:42 AM - edited 03-05-2019 10:39 PM
I have 2 image files on the bootflash of C4948, it always boot by first image whatever I configured second image file as
boot-start-marker
boot system flash bootflash:second image.bin
boot-end-marker
or
boot-start-marker
boot system flash second image.bin
boot-end-marker
Can anyone correct me? Thank you.
04-28-2008 07:38 AM
For example:
no boot system flash bootflash:oldimage.bin
boot system flash bootflash:newimage.bin
Edit:
Verify the boot config with "sh bootvar"
04-28-2008 08:19 AM
I did't configure the old image in "boot system", it's from default setting.
According to the show bootvar, it looks like the path is wrong.
BOOT variable = bootflash:cat4500-ipbasek9-mz.122-31.SG.bin,1;
CONFIG_FILE variable does not exist
BOOTLDR variable = bootflash:cat4500-ipbasek9-mz.122-31.SG.bin
Configuration register is 0x2101
04-29-2008 12:08 PM
BTW, it shows use first image automatically during the booting.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide