04-28-2008 07:12 AM
I'm running CWCS 3.x, CM 4.x and RME 4.x on a windows 2k server with sp4. The problem is with my RME Weekly Config Archive. The job fails every week due to devices that are no longer managed by CiscoWorks. These devices are aironet access points that were once autonomous but are now LWAPP. The devices have been deleted from Device Management and Campus Manager. How do I remove the devices from RME?
Thanks in advance for any help/advice.
04-28-2008 09:09 AM
If they have been removed from DCR, then they should have also been removed from RME. However, you should be able to go to RME > Devices > Device Management > RME Devices and delete the devices from there.
04-28-2008 10:08 AM
The devices have already been deleted from RME Device Management.
04-28-2008 10:28 AM
Where are you looking to see the failures? I have a feeling this might be a known aesthetic issue.
04-28-2008 11:13 AM
Thanks for your reply.
>RME
>Config Management
>Archive Management
>Archive Management Jobs
>Failed
>Weekly Config Archive
04-28-2008 11:41 AM
I recommend you open a TAC service request at this point as direct database access will most likely be required to figure out why these devices are remaining in RME after you have deleted them.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide