cue access

Answered Question
Apr 28th, 2008
User Badges:

Hi,

i have cue where i can access from command line through the router, no password at this stage when login to cue.

i am wondering how to know what is the username and password for the web cue access or at least can i set a new username and password for web access.


Good day

Correct Answer by Brandon Buffin about 8 years 12 months ago

The following link should help.


http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_password_recovery09186a008042aa29.shtml


Hope this helps. If so, please rate the post.


Brandon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Kenneth Mohammed Mon, 04/28/2008 - 10:59
User Badges:
  • Silver, 250 points or more

Look in the configuration under telephony-services in the running config of the router. If gui access has been setup, you will see the statement


"web admin system name [login name] [password | secret] xxxx"


if its not there, you can configure it and this will be the username/pw for gui access to cue.


Hope that helped

Actions

This Discussion