04-29-2008 05:11 AM - edited 03-10-2019 03:48 PM
We have a new ACSSE-1113 that won't boot to the login prompt... the screen just stays black. We see the POST info as the SE first starts up, but it never gets to the login prompt.
Any ideas would be appreciated.
Thanks.
John
04-29-2008 06:02 AM
John,
Make sure that we don't have any keyboard and monitor plugged in the appliance. You need to connect it using hypertrm.
Regards,
~JG
Do rate helpful posts
04-29-2008 06:09 AM
All we have conencted is the power cable, console cable and network cable.
In HyperTerm we do see the device's various POST messages as it powers up, but it never gets to the login prompt.
Thanks.
04-29-2008 06:14 AM
Please open a tac case.
Regards,
~JG
04-29-2008 10:59 AM
We ended up booting up with the recovery CD and reinstalling everything. This worked.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide