cannot apply policy-map to an inteface

Unanswered Question
Apr 29th, 2008
User Badges:

I am trying to apply policy map on the outside interface but I get error saying shape average/bandwidth are not supported on the interface.

Hardware: 6513 with WS-SUP720-3BXL

IOS: s72033-adventerprisek9_wan-mz.122-18.SXF3

Here is the config

class-map match-any p2p

match protocol gnutella file-transfer "*"

match protocol fasttrack file-transfer "*"

match protocol edonkey

match protocol winmx

match protocol kazaa2

match protocol napster

policy-map block-p2p

class p2p

shape average 80000

xxx_6513(config-if)#service-policy output block-p2p

shape average command is not supported in output direction for this interface

Configuration failed on:


XXXX_6513#sh running-config interface gigabitEthernet 13/44

Building configuration...

Current configuration : 205 bytes


interface GigabitEthernet13/44

description To XXX 7200

ip address xxxx xxxx

ip access-group protect_inside in

ip flow ingress

speed 100

duplex full

mls netflow sampling


Can anyone please tell me why I can't use shape average on that interface ?


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion