For example we will have multiple vlans on the stack (broadcast domains)
VLAN 10 printers 10.1.1.0-/24
VLAN 20 server 220.127.116.11-/24
VLAN 30 PC 18.104.22.168-/24
VLAN 40 Phones 22.214.171.124-/24
Someone on there PC wants to print to printer on VLAN 10 from VLAN 30
Is the -S image (IPB) ok for this?? its not clear in any doco what image is needed for routing between vlans (SVI's intervlan routing) on single 3750 stack.
Catalyst 3750 48 10/100 PoE + 4 SFP + IPB Image
Catalyst 3750 48 10/100 PoE + 4 SFP + IPS Image
The 3750 is a L3 switch so even with IP Base it will do inter-vlan routing. So you just need to create L3 SVI's for each vlan you want to route between and on the clients/printers set the default-gateway to be the corresponding SVI address.
The IP Base image also supports RIP and EIGRP stub routing but you don't need either of these to achieve what you want.