RA VPN - Clients cannot connect

Unanswered Question
Apr 30th, 2008

Hey Folks,

In a lab, I've used the ASDM VPN wizard to apply the settings for a Remote Access VPN. The problem is that the clients cannot connect, they get this error:

713902 Group = RemoteVPN, IP = 192.168.3.2, Removing peer from peer table failed, no match!

713903 Group = RemoteVPN, IP = 192.168.3.2, Error: Unable to remove PeerTblEntry

713902 Group = RemoteVPN, IP = 192.168.3.2, Removing peer from peer table failed, no match!

713903 Group = RemoteVPN, IP = 192.168.3.2, Error: Unable to remove PeerTblEntry

Attached is a simple diagram of my lab network, and the config of my ASA 5505 firewall. Can anyone see where I've made my mistake?

Thanks,

SM

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
smahbub Wed, 05/07/2008 - 13:40

The error message may be due to one of the following reasons:

1)The duplicate events are generated whenever a tunnel is torn down prematurely,

generally during the initial negotiation which causes.

2)Remote VPN peer may try to establish a VPN tunnel, the remote site may not have disabled the

VPN tunnel.Try disabling the vpn tunnel at the remote site.

singhsaju Fri, 09/19/2008 - 05:16

This could be due to ISAKMP policies of AES with SHA not supported on VPN client.

Try to make it work with minimum possible policies as suggested above like 3DES/SHA/Group2

HTH

Saju

Actions

This Discussion