04-30-2008 02:10 PM - edited 03-13-2019 05:12 PM
Im new on this, I install the AA Editor 2.3, I hit new, but after that, I can't drag and drop anything.
What is the problem?
thanks.
Solved! Go to Solution.
05-01-2008 06:35 AM
Make sure you are dragging and dropping onto the 'Start' icon.
05-01-2008 05:05 AM
Hi Rafael,
Sorry to hear this my friend. Can you please try the much newer CUE Editor version 3.1.1
http://www.cisco.com/cgi-bin/tablebuild.pl/cue-311-utilities
Hope this helps!
Rob
05-01-2008 08:13 AM
Hi Rob,
I'm not 100% sure, but chances are that a newer CUE editor will produce files that are not usable on a previous version of CUE.
Personally, I've never found anything wrong with the 2.3.4 editor the few times that I've used it.
05-01-2008 08:15 AM
I can tell you from experience that it isn't backwards compatible.
05-01-2008 10:01 AM
Hi, miltka, one question, if my CUE is 2.3.4 (UC500) my scripts should be done with AA Editor 2.3 , right?
05-01-2008 10:17 AM
Yes. I use 2.3 with my 2.3.4 install. The 3.x CUE Editors only seem to work with the 3.x CUE versions. I was looking for Release Notes earlier to back that up but couldn't find anything.
05-01-2008 06:35 AM
Make sure you are dragging and dropping onto the 'Start' icon.
05-01-2008 09:26 AM
Incredible!!!, I did that exactly as you said, on the Start Icon, it works!!.
Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide