Upgrading from CCM 5.1 to 6.1?

Answered Question
May 1st, 2008
User Badges:

Is there anything special that needs to be done for upgrading from CallManager 5.1 to 6.1? Any type of reconfiguration that will be required, or any data that will not be carried over?

From what I've been able to gather from the documentation, it's really just a straight upgrade, like applying a patch to CallManager 5, just wanted to make sure there's nothing we're missing.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4.5 (2 ratings)
Jaime Valencia Thu, 05/01/2008 - 08:35
User Badges:
  • Cisco Employee,
  • Hall of Fame,


it is really straightforward as you mention, just verify the compatibility to make sure all is fine:

Cisco Unified Communications Manager Server Support Matrix


Table 4 Supported Cisco Unified Communications Manager Upgrades for Release 5.x and Release 6.x




if this helps, please rate

Correct Answer
Rob Huffman Thu, 05/01/2008 - 09:33
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications


This Discussion