Swich 3550 -24-emi Help please

Unanswered Question
May 1st, 2008

Hi,

I have a 3550 which doesn`t bring up the int fasthernet interfaces in a "sh ip int brief"command or "sh Run". The system LEDlight stays amber and rps also but not flashing? I haven`t got a rps connected could this be the reason ?

If i do a "sh env all" command everything seems ok

[Switch#sh env all

FAN is OK

TEMPERATURE is OK

POWER is OK

RPS is NOT PRESENT] could some one maybe exlpain ??I would thankfull!

Switch#sh post

Stored system POST messages:

POST: CPU Buffer Tests : Begin

POST: CPU Buffer Tests : End, Status Passed

POST: CPU Interface Tests : Begin

POST: CPU Interface Tests : End, Status Passed

POST: Switch Core Tests : Begin

POST: Switch Core Tests : End, Status Passed

POST: CPU Interface 2nd Stage Tests : Begin

POST: CPU Interface 2nd Stage Tests : End, Status Passed

POST: CAM Subsystem Tests : Begin

POST: CAM Subsystem Tests : End, Status Passed

POST: Ethernet Controller Tests : Begin

Failed data line test (2).

addr=0x00000,sent=0x80000 recv=0x00

POST: Ethernet Controller Tests : End, Status Passed

!!! WARNING: The switch is not usable !!!

!!! WARNING: The switch is not usable !!!

Switch#

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Sushil Kumar Katre Thu, 05/01/2008 - 09:00

Hi Jacob,

This could be a hadrdware failure and you'll have to get this switch replaced.

-> Sushil

Actions

This Discussion