limit bandwidth to each customer

jjoseph01 · ‎05-01-2008

Hi all. I have a question that I think may not be uncommon. I have several customers that are connected into my dataceneter. I was wanting to limit each of their connection into our network, to regulate our own bandwidth. I would want to setup something to regulate maybe for example, 1 meg for one customer, 2 meg for a second customer, 3 meg for a third, and so on. Is it possible to do this on one interface of a router? Any help would be appreciated. Thanks.

cisco_lad2004 · ‎05-01-2008

it all depends how are the customers terminated.

if they each have a dedicated physical port or vlan, you can apply a policy map.

this can be done outbound / inbound.

HTH

Sam

jjoseph01 · ‎05-01-2008

Yeah, they would be vpn'ing into our firewall (ASA), and we forward on appropriately. Can you rate according to each vpn?

cisco_lad2004 · ‎05-01-2008

I don't have much experience with FWs, but depending on how u are configured, this document shows few examples.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008084de0c.shtml

HTH

Sam